Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> Protege DX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0452: EVAP Control System Pressure Sensor, Low Input >> Condition

DTC P0452: EVAP Control System Pressure Sensor, Low Input: Condition

WARNING: This page is about a different car, the 2002 Mazda Protege5 and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

DTC is set when engine coolant temperature is less than 176°F (80°C) and fuel tank pressure sensor input is less than .2 volt. This is a continuous monitor. MIL is illuminated when PCM detects malfunction during 2 consecutive drive cycles. Possible causes are: