Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission Shift Mechanism) >> Key Interlock Solenoid Inspection

Key Interlock Solenoid Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the key interlock solenoid connector.
  4. Insert the ignition key in the key cylinder.
  5. Inspect the key interlock operation when B+ is applied to the terminal as shown.
    • If not as specified, replace the key interlock solenoid.
    Fig 1: Inspecting Key Interlock Solenoid (1 Of 2)
    G01907622Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Key Interlock Solenoid (2 Of 2)
    G01907623Courtesy of MAZDA MOTORS CORP.
  6. Install reverse order of removal.
  7. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals