Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls [System & Component Testing] >> Engine Sensors & Switches >> Throttle Position Sensor >> Resistance Inspection (Miata)

Resistance Inspection (Miata)

  1. Disconnect TP sensor 3-pin harness connector. See Figure. Using DVOM, measure resistance between following TP sensor terminals:
    • Terminals "A" and "B" - 2500-5000 ohms.
    • Terminals "B" and "C" - 200-1100 ohms.

    If resistance readings are not as specified, replace TP sensor.

scientia non olet · About Mike's Workshop Manuals