Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls [Self-Diagnostics 3.0L]) >> Diagnostic Tests >> DTC P0111: Intake Air Temperature Circuit Performance Problem >> Detection Condition

Detection Condition

WARNING: This page is about a different variant/trim than selected.

Intake air temperature reading is more than engine coolant temperature reading by 104°F (40°C) and ignition is on. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in two consecutive drive cycles or in one drive cycle while DTC for same malfunction has been stored in PCM. PENDING CODE is available if PCM detects malfunction condition during first drive cycle. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About Mike's Workshop Manuals