Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver's Seat

Driver's Seat

  1. Disconnect the buckle switch connector.
  2. Inspect for continuity between the buckle switch terminals using an ohmmeter.
    • If not as specified, replace the front buckle.
    Fig 1: Inspecting Buckle Switch Continuity
    G01197874Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Buckle Switch Connector
    G01197875Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals