Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2002 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Manual Transaxle Clutch) >> Clutch Master Cylinder Disassembly/Assembly >> Snap Ring Disassembly/Assembly Note

Snap Ring Disassembly/Assembly Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. While pressing the piston in with a cloth-wrapped pin punch to protect the push rod contacting surface, remove/install the snap ring.
    Fig 1: Removing/Installing Snap Ring
    G01346725Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals