Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Servicing - M/T) >> Lubrication >> Checking Fluid Level

Checking Fluid Level

WARNING: This page is about a different variant/trim than selected.

Raise and support vehicle. Remove the oil level plug and the washer. Verify that the oil is near the bottom of the plug port. See Fig 1 . If the oil level is low, add the specified type of oil to the bottom of the plug port through the oil level plug hole. Install a new washer on the oil level plug and install. Tighten oil level plug to specification. See TORQUE SPECIFICATIONS  .

Fig 1: Checking Transaxle Fluid Level
G00158849Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals