Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Power Door Locks & Keyless Entry) >> Removal & Installation >> Immobilizer Unit >> Notes

Immobilizer Unit: Notes

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the illustration.
    Fig 1: Removing Immobilizer Unit
    G01196495Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
CAUTION:
  • After replacing the immobilizer unit with a new one, the engine cannot be started without reprogramming the ID number of the keys and the code word of the new immobilizer unit. Input the ID number and code word. See IMMOBILIZER SYSTEM REPROGRAM PROCEDURE  .