Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Washer System & Wiper System) >> Intermittent Rear Wiper Relay Inspection >> Notes

Intermittent Rear Wiper Relay Inspection: Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the voltage at the intermittent rear wiper relay terminals as indicated below.
  2. Disconnect the intermittent rear wiper relay connector before inspecting for continuity at the terminal H.
    • If not as specified, inspect the parts listed under "Action".
    • If the parts and wiring harnesses are okay but the system still does not work properly, replace the intermittent rear wiper relay.
scientia non olet · About Mike's Workshop Manuals