Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Glass/Windows/Mirrors) >> Power Window SUBSWITCH Removal/Installation >> Passenger's side

Passenger's side

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  3. Push out the clip from behind the front door trim, and remove the switch panel.
  4. Remove the screws, and remove the power window sub switch.
  5. Install in the reverse order of removal.
    Fig 1: Removing Power Window Subswitch - Passenger's Side
    G03701109Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals