Main Fan/Additional Fan Motor Operation Inspection: Specification

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

MAIN FAN/ADDITIONAL FAN MOTOR SPECIFICATIONS

Engine condition

A/C operation

ECT PID (°C {°F}

Voltage (V)

Ignition switch at ON or idle

Not operating

Below 95 {203}

Idle

Operating⁽¹⁾

6.9-12.1

Not operating

Above 100 {212}

0.6-14.6

⁽¹⁾	A/C pressure switch (middle pressure) is on.

If not as specified, inspect the following:
- CKP sensor
- ECT sensor
- APP sensor
- TP sensor
- A/C pressure switch (middle pressure)

5. If all items are okay, replace fan control module.