Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (On-Board Diagnostic [Engine Control System AJ]) >> OBD-II Drive Mode >> Mode 1 (PCM Adaptive Memory Produce Drive Mode)

Mode 1 (PCM Adaptive Memory Produce Drive Mode)

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine and warm up completely.
  2. Verify the following conditions and correct if necessary:
    • All accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
    • Initial ignition timing and idle speed are within specification.
  3. Perform no load racing at the engine speed of 2,500-3,500 rpm  for 15 s or more  , then idle the engine for 60 s or more  after the cooling fan stopped. If possible, monitor RPM PID for engine speed during this procedure.
scientia non olet · About Mike's Workshop Manuals