Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Power Steering System) >> Steering Gear And Linkage Disassembly/Assembly >> Seal Ring Assembly Note

Seal Ring Assembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new seal ring to the valve part of the pinion shaft using the SST  .
  2. After installing it, seat it properly using the SST  .
  3. Install the snap ring.
    Fig 1: Installing Snap Ring
    G03638509Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals