Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (On-Board Diagnostic (Engine Control System (AJ)) >> On-Board Diagnostic Test >> Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Record the FREEZE FRAME PID DATA using the WDS or equivalent.
    Fig 1: Identifying DLC-2 (Freeze Frame PID Data Access Procedure)
    G03643505Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals