Inspection Of Continuity

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the O/D OFF switch connector.
Inspect continuity at the O/D OFF switch.
- If the switch is okay, inspect the wiring harness. (O/D OFF switch-TCM, O/D OFF switch-Body ground)
- If not as specified, replace the selector lever component. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
  
  Fig 1: O/D Off Switch Continuity Specifications
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying O/D Off Switch Connector Terminals
  Courtesy of MAZDA MOTORS CORP.