All Supported On Board System Readiness Tests Not Completed

DETECTION CONDITION AND POSSIBLE CAUSE

24	ALL SUPPORTED ON BOARD SYSTEM READINESS TESTS NOT COMPLETED
DESCRIPTION	DTC P1000 received during emission test

ALL SUPPORTED ON BOARD SYSTEM READINESS TESTS NOT COMPLETED INSPECTION

STEP	INSPECTION		ACTION
1	PRELIMINARY CHECKS Perform the following preliminary checks: Vacuum hoses (check for proper routing, disconnection or damage). Electrical connections. Are all checks OK?	Yes	Go to step 2.
1		No	Service as required. Verify symptom no longer exists.
2	PERFORM PCM QUICK TEST Are any DTCs displayed during Continuous Memory, Key ON, Engine OFF (KOEO) or Key ON, Engine Running (KOER) Self Tests?	Yes	Check for cause, See DIAGNOSTIC TROUBLE CODE NUMBERS .
2		No	DTC P1000 is ignored in KOEO and KOER Self Test. If P1000 was the only DTC received, See OBD II DRIVE CYCLE MALFUNCTION . Otherwise, go to step 3
3	Verify test results. If OK, See DIAGNOSTIC INDEX to service any additional symptoms