Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1997 >> Millenia Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls - Remove/Install/Overhaul - 2.3L) >> Fuel System >> Fuel System Pressure Release

Fuel System Pressure Release

WARNING: This page is about a different variant/trim than selected.
  1. Start engine. Disconnect fuel pump relay. See FUEL PUMP RELAY LOCATION  table.
  2. Allow engine to run until it stalls. Turn ignition off. Reconnect electrical connector.
FUEL PUMP RELAY LOCATION

Application Location
Millenia 2.3L Beside Cruise Control Actuator.