Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1997 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Seat Belt System) >> Front Buckle Switch Inspection >> Passenger-Side

Front Buckle Switch Inspection: Passenger-Side

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Verify continuity as indicated. See Fig 1.
    • If not as indicated, replace the front buckle.
    Fig 1: Continuity Check Between Terminals Of Connector
    G01346300Courtesy of MAZDA MOTORS CORP.
    Fig 2: Checking Continuity Between Terminals Of Connector
    G01346301Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals