EGR Valve
Warm engine to normal operating temperature and operate at idle. Disconnect and plug vacuum hose at EGR valve. Engine should run smoothly. Connect vacuum pump to EGR valve, and apply vacuum. Engine should run rough or stall. If engine does not operate as specified, replace EGR valve.
EGR POSITION SENSOR RESISTANCE
| Terminals | (1) Ohms W/O Vacuum Applied | (1) Ohms W/Vacuum Applied | ||
|---|---|---|---|---|
| A & B | 2700 | 2700 | ||
| A & C | 500 | 2700 | ||
| B & C | 2400 | 100 | ||
|
||||