Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1994 >> Protege Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Testing >> Hydraulic System Pressure Test >> Gear Fluid Pressure Test

Gear Fluid Pressure Test

  1. Ensure steering pump pressure is within specification. To measure steering gear fluid pressure, open gauge valve completely. Increase engine speed to 1000-1500 RPM.
  2. Turn steering wheel from lock to lock. Measure steering gear fluid pressure. Ensure gear pressure is within specification. See HYDRAULIC SYSTEM FLUID PRESSURE SPECIFICATIONS  table. If pressure is not within specification, replace gear.
HYDRAULIC SYSTEM FLUID PRESSURE SPECIFICATIONS (1)

Application psi (kg/cm2 )
Protege & 323 1066 (75)
(1) Specifications are measured at 1000-1500 RPM, with fluid temperature at 122-140°F (50-60°C).
scientia non olet · About Mike's Workshop Manuals