Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1994 >> Protege Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> Intermittent Failures

Intermittent Failures

WARNING: This page is about a different car, the 1994 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.

Intermittent failures may cause Malfunction Indicator Light (MIL) to flicker or illuminate and go out after the intermittent fault goes away. However, the corresponding trouble code will be retained in ECU memory. If related fault does not reoccur within a certain time frame, related trouble code will be erased from ECU memory. Intermittent failures may be caused by a sensor, connector or wiring related problems. See INTERMITTENTS in TESTS W/O CODES article in the ENGINE PERFORMANCE section.