Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1994 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - Tests W/Codes - 2.0L A/T) >> Self-Diagnostic System >> Reading Codes >> Continuous Memory Codes

Continuous Memory Codes

WARNING: This page is about a different variant/trim than selected.

These codes result from information stored by PCM during continuous self-test monitoring. Codes are displayed after separator pulse code in KOEO SELF-TEST. Use these codes for diagnosis only when KOEO SELF-TEST and KOER SELF-TEST result in Code 111 (pass code) and all steps under QUICK TEST are successfully completed. (A few codes are exceptions which may be checked after KOEO codes have been repaired). These codes indicate faults recorded within last 40 engine starts. Fault may or may not be currently present. See DIAGNOSTIC TROUBLE CODE REFERENCE CHART.

scientia non olet · About Mike's Workshop Manuals