Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1992 >> 323 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EFI >> Engine Sensors & Switches >> Engine Coolant Temperature (ECT) Sensor >> Navajo

Engine Coolant Temperature (ECT) Sensor: Navajo

Sensor is located in intake manifold cooling passage, at front of engine. Sensor requires a 5-volt reference signal during engine operation. With sensor disconnected, measure resistance between sensor terminals. See ECT SENSOR RESISTANCE  table. Replace sensor as necessary.

ECT SENSOR RESISTANCE

Coolant Temperature Ohms
50°F (10°C) 58,750
68°F (20°C) 37,300
176°F (80°C) 280