Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1987 >> RX-7 Base, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Mode Control Motor

Mode Control Motor

  1. Disconnect 17 pin connector from logical control switch. Using an ohmmeter, measure resistance between terminal Nos. "q" and "p". Resistance should be 17-21 ohms.
  2. Connect battery power to terminal No. "p" while grounding terminal No. "q". Ensure that mode motor stops at "DEF" position.
  3. Connect battery power to terminal No. "q" while grounding terminal No. "p". Ensure that mode motor stops at "VENT" position.
scientia non olet · About Mike's Workshop Manuals