Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 1982 >> RX-7 GSL, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Choke Return & Hot Start Assist System >> Testing >> Hot Start Assist System

Hot Start Assist System

NOTE: Before replacing hot start motor or relay, check No. 1 water temperature switch as outlined in "Mazda RX7 Auxiliary Control Device," article in this section.
  1. Inspect hot start assist cable and linkage for proper installation, no binding or sticking, and full return. Warm engine to normal operating temperature and stop engine.
  2. Disconnect leading and trailing primary wires from ignition coils. Crank engine. Hot start lever should open throttle valve. If hot start system does not respond as outlined, check hot start assist relay.
scientia non olet · About Mike's Workshop Manuals