Interior Lighting System DTCS: BCM
| DTC | Description | Action |
|---|---|---|
| B1175:01 | Driver Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| B1176:01 | Passenger Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| B11C0:01 | Driver Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| B11C1:01 | Passenger Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| B12C2:11 | Puddle Lamp: Circuit Short To Ground | GO to Pinpoint Test B |
| B12C2:15 | Puddle Lamp: Circuit Short To Battery or Open | If the illuminated scuff plates are always on, GO to Pinpoint Test D If one or both illuminated scuff plates are inoperative, GO to Pinpoint Test B |
| B1313:11 | Interior Lighting Output: Circuit Short To Ground | GO to Pinpoint Test B |
| B1313:15 | Interior Lighting Output: Circuit Short To Battery or Open | If the courtesy lamps are always on, GO to Pinpoint Test D If the courtesy lamps are inoperative, GO to Pinpoint Test B |
| B145C:11 | Ambient Lighting Power Supply Output: Circuit Short To Ground | GO to Pinpoint Test H |
| B145C:15 | Ambient Lighting Power Supply Output: Circuit Short To Battery or Open | GO to Pinpoint Test H |
| B1465:00 | Ambient Lighting Bus 1: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| B1467:00 | Ambient Lighting Bus 3: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| B14AA:11 | Demand Lamp Output: Circuit Short To Ground | GO to Pinpoint Test E |
| B14AA:15 | Demand Lamp Output: Circuit Short To Battery or Open | GO to Pinpoint Test E |