Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2021 >> Nautilus Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 662 (Climate Control System - General Information) >> Removal And Installation >> In-Vehicle Temperature and Humidity Sensor >> Removal

In-Vehicle Temperature and Humidity Sensor: Removal

WARNING: This page is about a different car, the 2020 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the clips and remove the steering column opening trim panel. Disconnect the electrical connector. Use the General Equipment: Interior Trim Remover
    GFD539856Courtesy of FORD MOTOR COMPANY
  2. Remove the in-vehicle temperature and humidity sensor.
GFD539857Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals