Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2021 >> Aviator Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 698 (Rear Climate Control) >> Removal And Installation >> Rear Climate Control Housing >> Installation

Rear Climate Control Housing: Installation

WARNING: This page is about a different car, the 2020 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Replace the pass-through floor seal with new if seal is removed or damaged.

    To install, reverse the removal procedure.

  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the Specifications in the appropriate Climate Control article.

  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
  4. Lubricate the refrigerant system with the correct amount of clean refrigerant oil. Refer to the Refrigerant Oil Adding procedure in the appropriate climate control article.
scientia non olet · About Mike's Workshop Manuals