DTC P2418 - EVAP Control System Switching Valve Control Circuit/Open
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2418 - EVAP CONTROL SYSTEM SWITCHING VALVE CONTROL CIRCUIT/OPEN
| Description: This DTC sets when the signal moves outside the minimum or maximum limit for the commanded state of the fuel tank isolation valve (FTIV). | |||
Possible Causes:
|
|||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HX . | ||