Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2019 >> Navigator Select, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs Guided Routine >> Pinpoint Tests >> Pinpoint Tests CK: ABS Module DTC C1A99 - Pressure Sensor >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

The ABS module uses a pressure sensor located inside the HCU to monitor the integrity of the hydraulic system. When the brake pedal is pressed, the ABS module compares the value of the brake fluid line pressure sensor to the BOO switch input from the PCM over the HS-CAN. If the brake fluid pressure sensor value is not comparable to the BOO switch input, the ABS module sets one or more DTCs.

PPT CK ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C1A99:01 Pressure Sensor: General Electrical Failure This DTC indicates the brake fluid line hydraulic pressure sensor located inside the HCU has failed.
C1A99:28 Pressure Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure This DTC indicates the brake fluid line hydraulic pressure sensor located inside the HCU has failed.
scientia non olet · About Mike's Workshop Manuals