Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Side And Rear Vision) >> Diagnosis And Testing >> Blind Spot Monitoring >> Pinpoint Tests >> Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured >> Notes

Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Refer to Vehicle Emergency Messaging System , for schematic and connector information.

Normal Operation and Fault Conditions 

The SOD-R uses an address ground pin for configuration. The address ground is necessary so BLIS ® or the CTA system can decipher between the SOD-R and the SOD-L during configuration. The SOD-R communicates over the MS-CAN.

scientia non olet · About Mike's Workshop Manuals