Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2019 >> MKT Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Removal And Installation >> Manifold Absolute Pressure (MAP) / Intake Air Temperature 2 (IAT2) Sensor 3.5L GTDI >> Removal

Manifold Absolute Pressure (MAP) / Intake Air Temperature 2 (IAT2) Sensor 3.5L GTDI: Removal

NOTE: The Turbocharger Boost Pressure (TCBP) /Charge Air Cooler Temperature (CACT) sensor and the Manifold Absolute Pressure (MAP) / Intake Air Temperature 2 (IAT2) sensor are not interchangeable.
  1. Disconnect the MAP /IAT2 sensor electrical connector. Remove the retainer and the sensor.
    • Tighten to 6 Nm (53 lb-in).
    GFD231712Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals