Passenger Door Module (PDM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1189:29 | Front Window Position Sensor: Signal Invalid | GO to Pinpoint Test D |
| B118A:29 | Rear Window Position Sensor: Signal Invalid | GO to Pinpoint Test G |
| B12C5:71 | Front Window Lifter Motor Up Relay: Actuator Stuck | GO to Pinpoint Test D |
| B12C6:71 | Rear Window Lifter Motor Up Relay: Actuator Stuck | GO to Pinpoint Test G |
| B12C7:71 | Rear Window Lifter Motor Down Relay: Actuator Stuck | GO to Pinpoint Test G |
| B12C8:71 | Front Window Lifter Motor Down Relay: Actuator Stuck | GO to Pinpoint Test D |
| B12E9:23 | Rear Window Local Up/Down Switch: Signal Stuck Low | GO to Pinpoint Test G |
| B13E5:23 | Passenger Power Window Switch Up: Signal Stuck Low | GO to Pinpoint Test D |
| B13E6:23 | Passenger Power Window Switch Down: Signal Stuck Low | GO to Pinpoint Test D |
| C1B14:11 | Sensor Supply Voltage A: Circuit Short To Ground | GO to Pinpoint Test D |
| C1B14:15 | Sensor Supply Voltage A: Circuit Short To Battery or Open | GO to Pinpoint Test D |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | PERFORM the PMI using as-built data. CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If the DTC returns, INSTALL a new PDM. REFER to: Passenger Door Module (PDM) . |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Locks, Latches and Entry Systems . |