SYNC Module [APIM]: Removal
WARNING: This page is about a different car, the 2018 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Upload the APIM configuration to the scan tool by following the scan tool on-screen instructions.
- Release the retainers and remove the bracket.
- Remove the 4 bolts and the APIM.
- Disconnect the electrical connectors.
Torque: 22 lb.in (2.5 Nm)
- Disconnect the electrical connectors.