Windshield Washer Fluid Level Sensor: Removal
WARNING: This page is about a different car, the 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the RH fender splash shield. Refer to: Fender Splash Shield .
- Open the cap and siphon the windshield washer fluid from the reservoir. Use the General Equipment: Fluid Suction Gun Use the General Equipment: Fluid Container
- Disconnect the electrical connector.
-
NOTE: Be prepared to collect escaping fluid.
Remove the windshield washer fluid level sensor. Use the General Equipment: Fluid Container