Seat Backrest - Third Row, 60 Percent: Disassembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row .

1. 1.
   
   Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Third Row .

1. 2.
   
   Remove the safety belt anchor bolt.
   • To install, tighten to 40 Nm (30 lb-ft).

1. 3.
   
   Remove the backrest foam pad.

1. 4.
   
   Remove the nut, screw and support bracket.

1. 5.
   
   Remove the outboard latch-to-cushion frame bolt and outboard latch.
   • To install, tighten to 35 Nm (26 lb-ft).

1. 6.
   
   Remove the 2 inboard latch-to-backrest frame bolts and inboard latch.
   • To install, tighten to 55 Nm (41 lb-ft).

1. 7.
   
   Remove the 4 screws and safety belt retractor cover.

1. 8.
   
   Remove the safety belt retractor bolt.
   • To install, tighten to 40 Nm (30 lb-ft).

1. 9.
   
   Pinch to release the safety belt guide and remove the safety belt retractor.
   • Route through the backrest frame.

Courtesy of FORD MOTOR COMPANY

1. 10.
   
   Remove the 15 screws and backrest support panel.

1. 11.
   
   Remove the bolt and child safety seat tether anchor.
   • To install, tighten to 15 Nm (133 lb-in).

Courtesy of FORD MOTOR COMPANY

1. 12.
   
   To assemble, reverse the disassembly procedure.