Section 18 (Driveline System - General Information): Specifications: Specifications
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications
| Item |
Specification |
| Maximum allowable driveshaft runout |
1.0 mm (0.040 in) |
| Maximum axle flange runout |
0.28 mm (0.011 in) |
| Minimum Traction-Lok breakaway torque |
27 Nm (20 lb-ft) |
| U-joint operating angle |
0.5 degrees-3.0 degrees |