Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2017 >> MKZ Hybrid Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Module Communications Network (Except Hybrid)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test O : The Audio Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool >> Notes

Pinpoint Test O : The Audio Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to Module Communications Network for schematic and connector information.

Refer to Audio System/Navigation - Fusion Without Touchscreen for schematic and connector information.

Normal Operation and Fault Conditions 

The ACM communicates on the HS-CAN3. Diagnostic messages are sent/received between the DLC and the diagnostic scan tool through the HS-CAN2 circuits at the DLC, and translated through the GWM to the HS-CAN3.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 33 (20A) is OK.

scientia non olet · About Mike's Workshop Manuals