Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2017 >> MKZ Hybrid Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Module Communications Network (Except Hybrid)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test B : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool (China) >> Notes

Pinpoint Test B : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool (China): Notes

WARNING: This page is about a different variant/trim than selected.

Refer to Module Communications Network for schematic and connector information.

Refer to Auto-Start-Stop System for schematic and connector information.

Normal Operation and Fault Conditions 

The Direct Current/Direct Current (DC/DC) Converter Control Module communicates on the HS-CAN1.

Visual Inspection and Diagnostic Pre-checks 

Verify high current BJB fuse 3 (50A) and BJB fuse 23 (15A) are OK.

scientia non olet · About Mike's Workshop Manuals