Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2017 >> MKZ Hybrid Select >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls System - 2.0L DURATEC - Hybrid (96KW/130PS) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool to the module using the Programmable Modules Installation routine.

    Use the General Equipment: Ford Diagnostic Equipment

  3. Carry out the KOEO ELCM Self? Test after programming the PCM to relearn fuel system data. Refer to the instruction manual provided by the scan tool manufacturer.
  4. NOTE: The step is only necessary when installing a new component.

    Carry out the Parameter Reset procedure. REFER to: Anti-Theft Key Programming - Scan Tool .

scientia non olet · About Mike's Workshop Manuals