Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2017 >> MKX Select, 2.7L Eng VIN P, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Module Communications Network) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test H : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool >> Notes

Pinpoint Test H : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.

Refer to AUTO-START-STOP SYSTEM for schematic and connector information.

Normal Operation and Fault Conditions 

The Direct Current/Direct Current (DC/DC) Converter Control Module communicates on the HS-CAN1.

Visual Inspection and Diagnostic Pre-checks 

Verify high current BJB fuse 3 (50A) and BJB fuse 23 (15A) are OK.

scientia non olet · About Mike's Workshop Manuals