Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2017 >> MKT Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Removal And Installation >> In-Vehicle Temperature and Humidity Sensor >> Removal And Installation

Removal And Installation

  1. Remove the 2 steering column opening trim panel screws.
  2. Detach the in-vehicle temperature sensor from the steering column opening trim panel and remove the steering column opening trim panel.

    • Disconnect the electrical connector.

  3. Disconnect the in-vehicle temperature sensor electrical connector.
  4. Rotate the in-vehicle temperature sensor clockwise to disconnect it from the aspirator hose and remove the in-vehicle temperature sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals