Fuel Pump Driver Module (FPDM): Installation

Fuel Pump Driver Module - Lower 

1. Install the fuel pump driver module, then install and tighten the fuel pump driver module retaining nuts.

   Torque: 13 lb.in (1.5 Nm)

   Courtesy of FORD MOTOR COMPANY

2. Connect the fuel pump driver module electrical connector.

   Courtesy of FORD MOTOR COMPANY

3. Install the right rear air deflector, install the pushpin, then install and tighten the right rear air deflector retainers.

   Torque: 13 lb.in (1.5 Nm)

   Courtesy of FORD MOTOR COMPANY

   Fuel Pump Driver Module - Upper 

4. Install the fuel pump driver module, then install and tighten the fuel pump driver module retaining nuts.

   Torque: 13 lb.in (1.5 Nm)

   Courtesy of FORD MOTOR COMPANY

5. Connect the fuel pump driver module electrical connector.

   Courtesy of FORD MOTOR COMPANY

6. Install the cover.

Courtesy of FORD MOTOR COMPANY