Information System And Entertainment System - HARMAN Revel Audio System/Sync 2 DTCS: DACMC
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B116A:01 | Handset Microphone: General Electrical Failure | GO to Pinpoint Test AK |
| B117A:01 | Backup Microphone: General Electrical Failure | GO to Pinpoint Test AL |
| B13F5:01 | Microphone 3: General Electrical Failure | GO to Pinpoint Test AM |
| U0100:00 | Lost Communication with ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test AN |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AO |
| U2024:00 | Control Module Cal-Config Data: No Sub Type Information | This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM. If there have been recent service actions with the DACMC or ACM, INSTALL As-Built data from Professional Technician Society (PTS), following the diagnostic scan tool instructions under Module Programming>As-Built. Refer to: Module Configuration - System Operation and Component Description . If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. Refer to: Audio Front Control Module (ACM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM. If there have been recent service actions with the DACMC or ACM, INSTALL As-Built data from Professional Technician Society (PTS), following the diagnostic scan tool instructions under Module Programming>As-Built. Refer to: Module Configuration - System Operation and Component Description . If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. Refer to: Audio Front Control Module (ACM) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to an incomplete or incorrect DACMC PMI. CHECK the vehicle service history for recent service actions related to the DACMC or ACM. If there have been recent service actions with the DACMC or ACM, INSTALL As-Built data from Professional Technician Society (PTS), following the diagnostic scan tool instructions under Module Programming>As-Built. Refer to: Module Configuration - System Operation and Component Description . If there have been no recent service actions, the DACMC has failed to retain configuration data. INSTALL a new ACM. Refer to: Audio Front Control Module (ACM) . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new ACM. Refer to: Audio Front Control Module (ACM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new ACM. Refer to: Audio Front Control Module (ACM) . |
| U3000:92 | Control Module: Performance or Incorrect Operation | GO to Pinpoint Test E |
| U3000:94 | Control Module: Unexpected Operation | If an observable symptom is not
present, DISREGARD this DTC. If an observable symptom is present, GO to Pinpoint Test E |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test BD |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test BE |