Catalyst Monitor Sensor - 3.7L Ti-VCT: Removal
WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
All sensors
- 1.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting .
RH sensor
- 4.
Apply the specified chemical with a spray can. Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada). Special Tool(s): Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A).
LH sensor
- 6.
Apply the specified chemical with a spray can. Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada). Special Tool(s): Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A).