Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2015 >> Navigator Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Seating System) >> Removal And Installation >> Seat Control Switch - Third Row >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2016 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Release and remove the tray from the RH rear quarter trim panel.
    NOTE: The LH and RH switch wiring harness electrical connectors are not interchangeable.

  1. 2.
    Remove the affected seat control switch.
    • Release the 2 retaining tabs and detach the seat control switch from the RH rear quarter trim panel.
    • Pull the seat control switch through the opening and disconnect the electrical connector.

  1. 3.

    To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals