Configuring MyKey® Optional Restricted Features
NOTE:
If configuring an IA key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.
- 1.
Using an admin key that has not been programmed as a MyKey™, turn the ignition to RUN.
- 2.
From the message center main menu, use the up and down arrow buttons to scroll to and select Settings. Press the OK button.
- 3.
Use the up and down arrow buttons to scroll to and select MyKey. Press the OK button.
- 4.
Use the up and down arrow buttons to scroll to and select AdvanceTrac. Press the OK button.
- 5.
Use the left and right arrow buttons to configure the AdvanceTrac ® to be automatically locked on or able to be turned on or off by the MyKey™ driver. Press the OK button.
- 6.
Repeat steps 4 and 5 for the next features:
- Speed Warning: 45 55 or 65 MPH (choose the desired speed for the chime to sound)
- Volume Limiter ON or OFF (choose the audio volume to be limited to 45%)