Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2013 >> Navigator Base, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And Stability Control >> Removal And Installation >> Wheel Speed Sensor - Rear >> Removal and Installation

Removal and Installation

  1. Remove the parking brake shoes. For additional information, refer to PARKING BRAKE AND ACTUATION .
  2. Disconnect the wheel speed sensor harness from the retaining clips.
  3. Remove the rear wheel speed sensor bolt and the sensor.
    • To install, tighten to 18 Nm (159 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals