Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2013 >> MKX AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Ignition System - 2.0L GTDI) >> Removal And Installation >> Ignition Coil-On-Plug >> Notes

Ignition Coil-On-Plug: Notes

WARNING: This page is about a different car, the 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
Silicone Brake Caliper Grease and Dielectric Compound
XG-3-A
ESE-M1C171-A
Fig 1: Identifying Ignition Coil-On-Plug, Stud Bolt And Coil-On-Plug Electrical Connector
G07930768Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W500301 Bolt (2 required) - 8 Nm (71 lb-in)
2 W715638 Stud bolt (2 required) - 8 Nm (71 lb-in)
3 12029 Ignition coil-on-plug (4 required)
4 - Ignition coil-on-plug electrical connector (part of 12A581) (4 required)