Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Information System And Entertainment System - 8 Inch Touchscreen) >> General Procedures >> Accessory Protocol Interface Module (APIM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the FDIM. Refer to FRONT DISPLAY INTERFACE MODULE (FDIM) .
  2. To install, tighten the screws to 0.6 Nm (5 lb-In).
    G08595659
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals